We are raffling this limited edition NIB AR-15 by LaRue Tactical in Leander, Texas.
About the rifle:
This rifle will be numbered 001-125. The rifle raffled here is #4 of 125.
Each UDE Edition 5.56 PredatOBR rifle has UDE expertly applied to the exterior surfaces on the Upper Receiver, Lower Receiver, Handguard and both sides of the Dust Cover. A UDE LaRue A-PEG Pistol Grip and RAT Stock is factory installed. Along the handgaurd, Black LaRue GAP covers are installed, but the rifle also comes with additional UDE GAP covers and UDE IndexClips. A special-edition “UDE Owners Edition” Hat, 1 special-edition UDE 30-Rnd Lancer magazine and 1 “Smoke” 30-Rnd Lancer magazine will also be included.
The most remarkable feature of the PredatOBR is its ability to be completely “broken down” and stored into the optional Rollup Bag and Toolbox. The PredatOBR handguard has a locking stainless steel QD Lever system on each side. Once the levers are released, the handguard slides off of the upper assembly in seconds. The PredatOBR's barrel can easily be removed with the supplied PredatOBR Barrel Wrench, unscrew the Barrel Nut from Receiver and pull the Barrel Assembly free from Receiver. No need to remove the gas tube, gas block or muzzle device. Reverse the process to reinstall. Hand-tighten Barrel Nut and torque approximately 1/8-turn past hand-tight (Approximately 40-50 foot pounds). Once reassembled correctly, the point of impact (POI) shift will be 0.0 to 0.5 MOA of the original.
Caliber: 5.56 x 45 mm NATO
Barrel Lengths: 14.5”,16.1”,18",and 20"
Rifling Twist Rate: 1/8
Barrel Life: 10,000 (approx)
Gas System: Direct Impingement with LaRue PST™ port selector
Trigger: LaRue MBT (Black)
2ea, 30-Round Magazines
3ea 3” Rail Sections